Jacketing |
Ripcord | Yes |
Conductor |
AWG Size & Stranding | 10 AWG 7 Strand Class B |
Material | Bare Copper Wire |
Conductor Count | 7 |
Insulation |
Material | Polyvinylchloride/Nylon |
Wall Thickness | 0.020" PVC, 0.005" Nylon |
Color Code | Method 1, Table E-2, Black, Red, Blue, Orange, Yellow, Brown, Red |
Assembly |
Lay Length | Per UL Standard 1277 |
Fillers | N/A |
Binder | N/A |
Shield | Aluminum Mylar Tape |
Drain Wire | 14 AWG 7 Strand Tinned Copper |
Nominal Lay Length | 7.5" |
Jacket |
Material | Polyvinylchloride |
Wall Thickness | .060" |
Diameter | 0.651” |
Color | Black |
Ripcord | Yes |
Cold Bend Rating | -40°C |
Weight | 366 lbs./Mft |
Outside Diameter | 0.621" |
Markings |
Type | Permanent Inkjet Surface Print |
Legend | LAKE CABLE E208309 10AWG 7C (UL) TC-ER THWN-2/VW-1 600V 90'C DRY/WET SUN RES DIR BUR FT-4 "ROHS COMPLIANT" MADE IN USA |
Footage Markers | Ascending/Descending |
Standards |
Maximum Voltage | 600V |
Operating Temperature Range | 90C |
Approvals |
Approvals List | • Refer to NEC (NFPA 70) article 1277 for installation guidelines • Cable is suitable for use in Class I Division II hazardous locations • Individual conductors pass UL VW-1 flame test, rated THHN/THWN/VW-1 • UL listed as Type TC-ER per UL Standard 1277 for tray cables • UL approved for Direct Burial and Sunlight Resistant applications • Cable meets UL 1581 & 1202 (FT-4) 70,000 BTU/HR & ICEA T-29-520 210,000 BTU/HR requirements • Meets ICEA S-73-532, where applicable • All materials used in the manufacture of this cable are RoHS compliant • Made in the USA |