| Jacketing |
| Ripcord | Yes |
| Conductor |
| AWG Size & Stranding | 8 AWG 7 Strand Class B |
| Material | Bare Copper Wire |
| Conductor Count | 16 |
| Insulation |
| Material | Polyvinylchloride/Nylon |
| Wall Thickness | 0.030" PVC, 0.006" Nylon |
| Color Code | Method 1, Table E-2, lack, Red, Blue, Orange, Yellow, Brown, Red |
| Assembly |
| Nominal Lay Length | 15" |
| Shield | Non-Shielded |
| Drain Wire | No |
| Jacket |
| Material | Polyvinylchloride |
| Wall Thickness | .080" |
| Color | Black |
| Outside Diameter | 1.158" |
| Weight | 1256 lbs./Mft |
| Markings |
| Type | Permanent Inkjet Surface Print |
| Legend | LAKE CABLE E208309 8AWG 16C (UL) TC-ER-JP THWN-2/VW-1 600V 90C DRY/WET PVC JACKET SUN RES DIR BUR FT4 "ROHS COMPLIANT" MADE IN USA |
| Footage Markers | Ascending/Descending |
| Standards |
| Maximum Voltage | 600V |
| Operating Temperature Range | 90C |
| Approvals |
| Approvals List | • Refer to NEC (NFPA 70) article 1277 for installation guidelines
• Cable is suitable for use in Class I Division II hazardous locations
• Individual conductors pass UL VW-1 flame test, rated THHN/THWN/VW-1
• UL listed as Type TC-ER per UL Standard 1277 for tray cables
• UL approved for Direct Burial and Sunlight Resistant applications
• Cable meets UL 1581 & 1202 (FT-4) 70,000 BTU/HR & ICEA T-29-520 210,000 BTU/HR requirements
• Meets ICEA S-73-532, where applicable
• All materials used in the manufacture of this cable are RoHS compliant
• Made in the USA |
