888.505.1457 > Get a Quote
Copper Price 4/16/2024 4.3050
Get a Quote
Menu
Picture of VFDX43SCU

VFDX43SCU

4 AWG 3 conductor 413 strand bare copper with XLPE insulation, (3) uninsulated grounds, a helical bare copper tape shield with an overall PVC jacket 1KV VFD cable, approved for use in SUN RES 90°C applications.
SKU: VFDX43SCU
 

• Refer to NEC (NFPA 70) article 336 for installation guidelines
• Cable is suitable for use in Class I Division 2 hazardous locations
• UL listed as Type VFD per UL Standard 2277 for Flexible VFD Servo Motor Cables
• UL approved for Sunlight resistant applications
• Individual conductors pass UL VW-1 flame test, rated XHHW-2/VW-1
• Cable meets UL 1581 & 1202 (FT-4) 70,000 BTU/HR & ICEA T-29-520 210,000 BTU/HR requirements
• Meets ICEA S-95-658, where applicable
• Cable meets RoHS 2002/95/EC Directive, RoHS 2 2011/65/EU Directive, RoHS 3 2015/863/EU Directive
• Cable is REACH compliant per Regulation (EC) No 1907/2006 (224) Updated June 10, 2022
• Made in the USA

This spec is for informational purposes and subject to change. This spec may not be suitable for submission. Contact Lake Cable for non-watermark spec sheet.
Products specifications
Attribute nameAttribute value
Conductor
AWG Size & Stranding4 AWG 413 Strands Class K
MaterialAnnealed Bare Copper
Conductor Count3 Conductors
Insulation
MaterialCross-linked Polyethylene
Wall Thickness0.045"
Color CodeMethod 1, Table E-2
Assembly
Ground(3) Uninsulated – 12 AWG 65 Strand Bare Copper
Fillers"Non-Hygroscopic Polypropylene - As required for a circular cross-section"
BinderClear Mylar
Shield0.005” Helical Bare Copper Tape – 20% minimum overlap
Drain WireN/A
Jacket
MaterialPolyvinylchloride
Wall Thickness0.080”
Diameter0.897” ± 0.070”
ColorBlack
RipcordYes
Cold Bend Rating-40°C
Weight777 lbs./Mft.
Markings
TypeCable shall be permanently identified via surface inkjet print
LegendLAKE CABLE E208309 4AWG 3C (UL) TC-ER XHHW-2/VW-1 UNINSULATED GROUNDS 1000V 90C DRY/WET BARE COPPER TAPE SHIELD PVC JACKET SUN RES DIR BUR FT4 OR FLEXIBLE VFD SERVO MOTOR CABLE XHHW-2 CDRS 1000V 90C DRY/WET “ROHS COMPLIANT” MADE IN USA
Footage MarkersYes

Remember, all of our wire can feature:

  • Short minumum runs
  • Special jacket colors including stripes
  • Custom print legends
  • Custom cable constructions
  • Custom packaging - boxes or reels
  • Custom lengths
  • Your name on package labels
Bensenville Location - Corporate & Factory
529 Thomas Drive, Bensenville, IL 60106 Phone: 888.505.1457 | Fax: 630.860.5944
Valparaiso Location
2700 East Evans Ave, Valparaiso, IN 46383 Phone: 888.505.1457 | Fax: 219.548.2799
Lake Copper Conductors
4430 Eastland Drive, Elkhart, IN 46516 Phone: 888.505.1457 | Fax: 847.378.7004
Low Voltage Facility
139 Foster Avenue, Bensenville, IL 60106 Phone: 888.505.1457 | Fax: 630.860.5944
Proudly Made in the USA
Copyright © 2024 Lake Cable. All rights reserved.