VGXC42

4 AWG 2 conductor 7 strand bare copper with cross-linked polyethylene insulation, an uninsulated bare copper ground conductor unshielded with an overall chlorinated polyethylene jacket 600V control tray cable, approved for use in SUN RES DIR BUR OIL RES I & II 90°C applications.

SKU: VGXC42

• Made in the USA
• Individual conductors pass UL VW-1 flame test, rated XHHW-2/VW-1
• Cable meets UL 1581 & 1202 (FT-4) 70,000 BTU/HR & ICEA T-29-520 210,000 BTU/HR requirements
• All materials used in the manufacture of this cable are RoHS compliant
• Refer to NEC (NFPA 70) article 1277 for installation guidelines
• Cable is suitable for use in Class I Division II hazardous locations
• UL listed as Type TC-ER per UL Standard 1277 for tray cables
• UL approved for Direct Burial, Sunlight and Oil I & II Resistant applications

This spec is for informational purposes and subject to change. This spec may not be suitable for submission. Contact Lake Cable for non-watermark spec sheet.

Products specifications

Attribute name	Attribute value
Conductor
AWG Size & Stranding	4 AWG, 7 Strands Class B
Material	Annealed Bare Copper
Conductor Count	2 Conductors
Insulation
Material	Cross-linked Polyethylene
Wall Thickness	0.045”
Color Code	Method 1, Table E-2
Assembly
Lay Length	Per UL Standard 1277
Ground	Uninsulated - 8 AWG, 7 Strand Bare Copper
Fillers	Non-Hygroscopic Polypropylene - As required for a circular cross-section
Binder	Clear Mylar
Jacket
Material	Chlorinated Polyethylene
Wall Thickness	0.060”
Diameter	0.719”
Color	Black
Ripcord	Yes
Cold Bend Rating	-25°C
Weight	528 lbs./Mft.
Markings
Type	Cable shall be permanently identified via surface inkjet print
Legend	LAKE CABLE E208309 4AWG 2C (UL) TC-ER XHHW-2/VW-1 UNINSULATED GROUND 600V 90’C DRY/WET CPE JACKET SUN RES DIR BUR OIL RES I & II FT4 “ROHS”
Footage Markers	Yes

Copper Price 4/26/2024 4.6215

VGXC42

Bensenville Location - Corporate & Factory

Valparaiso Location

Lake Copper Conductors

Low Voltage Facility