VXC102S

10 AWG 2 conductor 7 strand bare copper with XLPE insulation, an aluminum/mylar shield with a stranded tinned copper drain wire and an overall CPE jacket 600V control tray cable, approved for use in SUN RES DIR BUR OIL RES I & II 90°C applications.
SKU: VXC102S
 
• Refer to NEC (NFPA 70) article 1277 for installation guidelines
• Cable is suitable for use in Class I Division II hazardous locations
• UL listed as Type TC-ER per UL Standard 1277 for tray cables
• UL approved for Direct Burial, Sunlight and Oil I & II Resistant applications
• Cable meets UL 1581 & 1202 (FT-4) 70,000 BTU/HR & ICEA T-29-520 210,000 BTU/HR requirements
• Meets ICEA S-73-532, where applicable
• All materials used in the manufacture of this cable are RoHS compliant
• Made in the USA
This spec is for informational purposes and subject to change. This spec may not be suitable for submission. Contact Lake Cable for non-watermark spec sheet.
Products specifications
Attribute nameAttribute value
Conductor
AWG Size & Stranding10 AWG 7 Strands Class B
MaterialAnnealed Bare Copper
Conductor Count2 Conductors
Jacket
MaterialChlorinated Polyethylene
Wall Thickness0.045”
Diameter.445”
ColorBlack
RipcordYes
Cold Bend Rating-25°C
Weight150 lbs./Mft.
Assembly
Lay LengthPer UL Standard 1277
FillersN/A
BinderN/A
ShieldAluminum/Mylar Tape – 100% coverage
Drain Wire14 AWG, 7 Strand Tinned Copper
Insulation
MaterialCross-linked Polyethylene
Wall Thickness0.030”
Color CodeMethod 1, Table E-2
Markings
TypeCable shall be permanently identified via surface inkjet print
LegendLAKE CABLE E208309 10AWG 2C SHIELDED (UL) TC-ER XHHW-2/VW-1 600V 90’C DRY/WET CPE JACKET SUN RES DIR BUR OIL RES I & II FT4 “ROHS”
Footage MarkersYes

Remember, all of our wire can feature:

  • Short minumum runs
  • Special jacket colors including stripes
  • Custom print legends
  • Custom cable constructions
  • Custom packaging - boxes or reels
  • Custom lengths
  • Your name on package labels