VXC163

16 AWG 3 conductor 7 strand bare copper with XLPE insulation, unshielded with an overall CPE jacket 600V control tray cable, approved for use in SUN RES DIR BUR OIL RES I & II 90°C applications.

SKU: VXC163

• Refer to NEC (NFPA 70) article 1277 for installation guidelines
• UL listed as Type TC-ER per UL Standard 1277 for tray cables
• UL approved for Direct Burial, Sunlight and Oil I & II Resistant applications
• Cable meets UL 1581 & 1202 (FT-4) 70,000 BTU/HR & ICEA T-29-520 210,000 BTU/HR requirements
• Meets ICEA S-73-532, where applicable
• Cable is suitable for use in Class I Division II hazardous locations
• Made in the USA
• All materials used in the manufacture of this cable are RoHS compliant

This spec is for informational purposes and subject to change. This spec may not be suitable for submission. Contact Lake Cable for non-watermark spec sheet.

Products specifications

Attribute name	Attribute value
Conductor
AWG Size & Stranding	16 AWG, 7 Strands Class B
Material	Annealed Bare Copper
Conductor Count	3 Conductors
Insulation
Material	Cross-linked Polyethylene
Wall Thickness	0.030”
Color Code	Method 1, Table E-2
Assembly
Lay Length	Per UL Standard 1277
Fillers	N/A
Binder	N/A
Shield	N/A
Drain Wire	N/A
Jacket
Material	Chlorinated Polyethylene
Wall Thickness	0.045”
Diameter	0.340”
Color	Black
Ripcord	Yes
Cold Bend Rating	-25°C
Weight	77 lbs./Mft.
Markings
Type	Cable shall be permanently identified via surface inkjet print
Legend	LAKE CABLE E208309 16AWG 3C (UL) TC-ER XLPE 600V 90’C WET/DRY CPE JACKET SUN RES DIR BUR OIL RES I & II FT4 “ROHS”
Footage Markers	Yes

Copper Price 4/26/2024 4.6215

VXC163

Bensenville Location - Corporate & Factory

Valparaiso Location

Lake Copper Conductors

Low Voltage Facility