This spec is for informational purposes and subject to change. This spec may not be suitable for submission. Contact Lake Cable for non-watermark spec sheet.
Products specifications
Conductor
- AWG Size & Stranding:
- 16 AWG 7 Strand Class B
- Material:
- Annealed Tinned Copper
- Conductor Count:
- 12
Insulation
- Material:
- Cross-linked Polyethylene
- Wall Thickness:
- 0.030"
- Color Code:
- Black, Red
Assembly
- Fillers:
- N/A
- Binder:
- Clear Mylar
- Shield:
- N/A
Jacket
- Material:
- Low Smoke FR Zero Halogen Polyolefin (LSFR-0HPO)
- Wall Thickness:
- 0.060"
- Diameter:
- 0.609"
- Weight:
- 232 lbs/Mft
Markings
- Type:
- Cable shall be permanently identified via surface inkjet print
- Legend:
- LAKE CABLE E208309 16AWG 12C (UL) TC-ST1-ER XHHW-2 600V 90C DRY/WET UNINSULATED GROUND LSZH JACKET SUN RES DIR BUR “ROHS” IEEE 1202 FT4
- Footage Markers:
- Yes
Approvals
- Approvals List:
• Refer to NEC (NFPA 70) article 336 for installation guidelines
• Cable is suitable for use in Class I Division 2 hazardous locations
• *UL listed as Type TC-ST1 per UL Standard 1277 for tray cables with 2 conductors
• *UL listed as Type TC-ST1-ER per UL Standard 1277 for tray cables 3+ conductors
• Cable meets Limited Smoke Tests (ST1) from UL Standard 1685
• UL approved for Direct Burial, Sunlight Resistant & Low Smoke applications
• Cable meets IEEE 383 & UL 1581 70,000 BTU/HR flame test requirements
• Meets ICEA S-73-532, where applicable
• Cable meets Cold Bend -25°C per UL standard 1277
• Due to the frequent updates to regulations, specifically California Proposition 65, EU REACH
• SVHCs and ROHS please contact Lake Cable for the most up to date compliance statement.
